We are a leading Manufacturer & Exporter of Pipe and Tube Coating Systems such as Tube Coating Systems and Internal External Pipe Coating Systems from India.
Approx. Rs 1 Lakh / SetGet Latest PriceProduct BrochureProduct Details:
|Minimum Order Quantity||1 Set|
|Rotating Nozzle Type||600 mm and above up to 2.5 meter*|
|Centrifugal Impeller (Bell) Type||100 to 300 mm* & 300 to 600 mm*|
|Airless Internal/External spray painting of rotating pipe||600 to 2500 mm*|
|Hollow cone spray nozzle||50 to 150 mm*|
Approx. Rs 18 Lakh / UnitGet Latest PriceProduct Details:
|Minimum Order Quantity||1 Unit|
|Material to be coated||Steel,Aluminium,Iron|
|Voltage||380 V / 220 V|
|Frequency||50 to 60 Hz|
Over-sprayed coating material is collected at the bottom of the spray chamber. A diaphragm pump is used to pump the coating material tank through a bag type low – pressure filter.
The fumes created by spray (Hot airless spray creates minimum fumes compared to any other type of spray systems) are sucked and blown out with the help of exhaust blower provided at the top of the spray chamber.
Some traces of the coating material are carried by these exhaust fumes, these fumes are first collected in suction chamber on both sides then these fumes enter in water spray chamber.
The tube moving on the conveyor passes through a circular spraying ring mounted with a number of airless spray nozzles (normally).
These spray nozzles are mounted on adjustable rods to adjust spraying distance from the substrate (tube outer surface).
The spray nozzle size, the spraying distance and the number of nozzles depends on:
Explore More Products